|
Category > Guitar Amp Foot Controllers and Switches
Behringer FCB1010 MIDI Foot Controller
No matter what you play, or even if you're an engineer with a MIDI arsenal, you'll appreciate the way our FCB1010 helps you get the most out of your gear without tying up your hands or slowing down your performance. On top of its impressive MIDI functions, it gives you 2 jacks for analog switching and rugged, road-proof construction.
Behringer FCV100 Dual Mode Foot Pedal
The Foot Controller FCV100 is a flexible dual-mode foot pedal for volume and modulation control. It features volume control of one stereo or two individual musical instruments, and its dedicated modulation function provides a direct connection to a keyboard's modulation control input. The FCV100 is VCA controlled for utmost reliability and smooth audio performance.
Boss FS-5L Footswitch (Latching)
Durable metal footswitch available in latching and unlatching types.
Fender 1-Button Footswitch with 1/4 Inch Jack
Order a replacement or add flexibility to your amp! All Fender footswitches come with 12 ft. of cable. This 1-button switch features a contemporary design, channel switching, and a 1/4 in. jack. Suited for use with the Champ 110, Blues Deluxe, M-80 Dual Showman (86), and Princeton 65.
Fender 2-Button Footswitch with 1/4 Inch Jack
Order a replacement or add flexibility to your amp! This footswitch has a 1/4-inch jack and includes with 12 feet of cable. The two-button design offers channel switching and drive/more drive. Works great with the Frontman series, Deluxe 112, Stage 112, Blues Deluxe, Blues DeVille, Roc Pro 700, Performer 650, Champ 25, The Twin, and more!
Fender ULT4 Footswitch for BDEC/GDEC Amplifiers
The ULT4 footswitch has four modes indicated by the three LEDs on the left side of the footswitch (no LEDs lit indicates the fourth mode--Tuner Mode). Press the MODE/TUNER button repeatedly to cycle through the modes (press and hold for a shortcut to Tuner Mode). The ULT4 4-button footswitch is for Mode Select, Start/Stop of Backing Tracks and Phrase Samples, Program Select and Tuner Select and has a 1/4 inch jack.
Ibanez IFC2 Foot Controller for MIMX Series Amplifiers
The IFC2 is an optional foot controller for the MIMX series amplifiers. Use it to control expression pedal effects.
Ibanez IFS2 2-Button Footswitch
2 Button LED Latching Footswitch (Works with Ibanez Toneblaster and Toneblaster X amplifiers).
Ibanez IFS2G 2-Button Latching Footswitch with LEDs
The Ibanez IFS2G is a two-button footswitch built for the Ibanez Tube Screamer TSA15H amp head. Featuring two LEDs for indicating that the pedal has been engaged, this footswitch activates the TSA Tube Screamer Amp's built-in tube overdrive function. The Ibanez footswitch also includes a boost activation button.
Ibanez IFS2X 2-Button Latching Footswitch
Use this 2-button latching footswitch to turn on and off functions on your Ibanez Toneblaster and Toneblaster X amplifiers. Features LED indicators so you know what is engaged.
Ibanez IFS4X 4-Button Footswitch for TBX150R
Use the Ibanez IFS4X 4-button footswitch to turn on and off functions of the TBX150R remotely with your foot. LED indicators clearly show which buttons are engaged.
Line 6 FBV2 2-Button Footswitch
This 2-button footswitch allows you to scroll through the first 4 presets on PODXT, PODXT Pro, Bass PODXT, Bass PODXT Pro, Flextone III, Vetta, Vetta II, HD147, Duoverb, Spider II, and Spider IV.
Line 6 FBV Express MKII Foot Pedal Controller
Tough enough for arena stages yet small enough to fit in your backpack, FBV Express(TM) MkII delivers a crucial collection of hands-free functionality that will keep you at the foot of the stage instead of tied to the front of your Line 6 amp or POD(R).
Line 6 FBV Ultra Command for Vetta Combo/Head
The FBV Ultra Command Foot Controller offers independent switching for changing programs and effects, wah and volume pedals - which do double duty as assignable expression pedals for other amp and effect parameters - tap tempo, and tuner command.
Marshall P801 Single Footswitch
This universal footswitch works with most Marshall amps. Plug in the 1/4-inch cable (included) and change channels without having to walk back to the amp.
Marshall P802 Twin Footswitch (Boost and Reverb)
Marshall's brand new footswitches work with either Valve State or 900 Series Amps. With attached cable.
Marshall PEDL10049 Haze Footswitch
The PEDL10049 Haze 4 button footswitch gives you additional control over the 40-watt MHZ40C. With independent buttons for channel switching, overdrive boost, reverb and effects; having full hands-free access to your amp is a necessity for live playing and getting ready for the big-time. Why settle for 2 button switching when you can have more?
Marshall PEDL90008 Stompware Pedal
Made for the MGFX Series Marshals with Built in Effects, this 4 button footswitch gives the MGFX user control over the Channel, overdrive, tap tempo and tuner switches on the front panel or 4 completely independent presets. Switch between Clean/Crunch, stomp the Overdrive to give your setting a volume boost, adjust the speed of your delay or modulation effects with the Tap Tempo switch and tap into the built-in tuner right at your feet so you can get back to playing.
![Orange Dual Function Footswitch]()
Orange Dual Function Footswitch
![Orange Single Function Footswitch]()
Orange Single Function Footswitch
Peavey Sanpera I Vypyr Foot Controller
The Sanpera I includes an expression pedal for executing volume, wah and pitch shifter functions, plus four momentary feature selector buttons. Both the Sanpera I and II are housed in roadworthy and rugged cast-metal casings and feature high-quality metal switches.
Peavey Sanpera II Vypyr Foot Controller
The Sanpera II allows the user to remotely control virtually any feature of the VYPYR Series modeling amplifiers, and increases the preset storage from 12 in-amp presets to an astounding 400 programmable presets. This controller features dual, assignable expression pedals with tap switches, dedicated tap tempo and looper control, as well as footswitches for accessing presets, preamp "stompbox" effects, post-amp "rack" effects, delay and reverb.
Peavey Valve King Footswitch
If you've got a Valve King and you want to use some of the footswitchable tones, then you've got to get yourself a Valve King footswitch. Featuring two LED indicator lights you can choose channels or volume/lead tones at the press of your foot. Includes a 15 foot cable and 1/4 inch right angle plug.
Radial Tonebone Headbone VT Amplifier Head Switcher
Two heads, 1 cabinet -- the ultimate in tone control is now possible from Radial. We call it Headbone. Two models to choose from: the Headbone VT for valve-tube heads and the Headbone SS for solid-state amps. Both Headbones are equipped with a Slingshot remote input that lets you switch heads with any foot switch. Combined with Loopbone, you can switch heads and insert an effect with 1 action.
Roland FC300 Guitar Foot Controller
The FC-300 sets a new standard of power, versatility and innovation for MIDI foot control. With features such as bi-directional MIDI data flow to the Roland VG-99 via newly adopted RRC2, patch memory recall, twin expression and control pedals and more, this advanced control station is a perfect companion for Roland's new VG-99 V-Guitar System or any other performance-based MIDI instrument or device.
Roland FS1 - Single Footswitch
The FS-1 is a single footswitch to be used with Roland's legendary Jazz Chorus amplifier. With the FS-1 you can select the JC-120's vibrato, reverb, or chorus with a tap of the foot. You'll need 3 if you intend to remotely switch all effects.
Boss FS-5U Footswitch (Unlatching)
Boss offers guitarists 2 types of footswitches for different applications. The FS5U momentary type footswitch lets you engage a function while you hold down the switch.
Boss FS-6 Dual Footswitch
Two switches in one, Boss's new FS-6 combines latch- and momentary-type switching into one unit. With two switches conveniently housed side-by-side, the FS-6 allows each switch to be set for latch or momentary operation. Pick the configuration that best suits your playing style and setup.
TC Electronic RC4 Floor Controller
Designed as a floor controller for RH450, RC4 offers you a tuner indicator, a mute switch, and three preset foot switches to recall the three user memories. RC4 is conveniently powered from the amp and is a great addition to the system.
Voodoo Lab Amp Selector 4-Way A/B Box
The Voodoo Lab Amp Selector is the ultimate stand-alone tool for switching your guitar into multiple amplifiers. It lets you use up to four amps simultaneously without added hum or loss of tone.
Vox VFS5 Footswitch for VT Series Amplifiers
Control your tone on stage or in the studio with the VFS5 foot controller which works with any Vox VT series amp. Use this rugged 4-button footswitch to turn reverb and effects on and off, switch between presets, and even adust speed and tap settings with your foot. Vox VT modeling amps each pack an incredible array of amp tones and effects, and you can take advantage of their power and versatility by connecting a VFS5 foot controller!
|