|
Category > Guitar Effects Power Adapters and Supplies
Behringer PSUHSBALL All-Country Power Adapter
The Behringer POWER THE WORLD PSUHSBALL is a all-country compatible DC 9 V / 1.7 A Power Adapter with Daisy-Chain Connectors, Jumper Cables and All-Country Mains Adapters.
Behringer PSUSB General Purpose Power Supply
Use Behringer new general purpose DC 9 V power adapter PSU-SB to power virtually all your guitar or bass guitar stomp boxes and effects pedals.
Boomerang Power Supply for III Looper and E-155
The E-Series Boomerang Power Supply is specifically modeled for powering the E155 Chorus Delay and the E156 Rang III Looper. The E-Series pedals work perfectly with this 9V power supply.
Boss PSA-120S Power Supply
The PSA120S is the recommended power supply for products including all new BOSS Compact and Twin pedals, ME-50/-20/-20B Multi-effects, the DB-66/-88/-90 metronomes, DR-Series drum machines (except DR-880), FC-Series foot controllers, MC-202, SH-101, SP-202, TR-626, and all TU-Series tuners.
Danelectro DA1 9VDC Power Supply
"Zero Hum (C)"Adapter for most Danelectro pedals requiring 9 Volts. Zero Hum circuitry kills line noise that otherwise ends up coming out of your amp.
Dunlop DCB10 DC Brick Universal Power Supply
The Dunlop DCB10 DC Brick is the most reliable and consistent way to power your effects. Forget the collection of wall warts... the DC Brick will drive ten (10) pedals from the same source!
Dunlop ECB02 9VDC Power Supply for Bass Crybaby
This power supply is designed to provide the proper 9V DC power to pre 1993 Dunlop pedals, smaller MXR pedals and the GCB-100 Bass Crybaby.
Dunlop ECB03 9VDC Power Supply
Designed to provide the proper 9V DC power for post 1992 Dunlop pedals, center negative, 5.5mm coax plug. This power supply works with the GCB-95 Crybaby(R) Wah Wah, 95Q Crybaby Wah Wah, QZ1 Crybaby Q Zone, Crybaby BB-535 Series Wah, and EW-95V Mister Crybaby Super Volume Wah.
Dunlop ECB05 12VDC Power Supply for Ace
Designed to provide the proper 12V DC power to Dunlop pedals such as the Rockman Guitar Ace, Metal Ace, or Bass Ace. Center positive, 5.5mm plug.
Dunlop ECB04 18VDC Power Supply
Designed to provide the proper 18V DC power to Univibe, Rockman, and Dunlop pedals, center negative, 5.5mm coax plug.
DOD PS125 9VDC Power Supply for DFX and Some FX Series (1/8 In Mini Plug)
The DOD PS125 power supply will juice up DFX and some older FX Series pedals.
DOD PS200R 9.6VDC Regulated Power Supply for FX Series (Barrel Plug)
This power supply works with the current DOD FX Series, the T2 Tuner, the TEC4 and TEC4X, the VOTec, ACOUSTec, and the BASSTec.
DigiTech PS0913B 9VAC Power Supply for RP100
Save the earth by avoiding the use of costly batteries that end up in landfills. Feel better about yourself by using an AC adapter instead.
HAZ Laboratories PS1A 18VDC Power Supply for Mu-Tron III+
Use this handy battery eliminator to power your Mu-Tron III+ pedal. Converts 120 volts AC, 60 Hz input into 18 volts DC. Make your wallet and the environment a little happier by not using batteries.
Hosa ACD477 100VAC to 240VAC Multi-Voltage AC Power Adapter
Multi-voltage AC adapter for use practically anywhere
Ibanez AC109 9VDC Regulated Power Supply
This standard 9-volt power adapter is designed for use with Ibanez Series pedals.
KMI Batt-O-Meter Battery Tester
Another innovation brought to you by Keith McMillen Instruments the Batt-O-Meter checks hard-to-reach batteries via the 1/4-inch input on most instruments and effects pedals.
Korg A30950 KA183 9VDC Power Supply for AX-Series Pedals
Batteries are expensive. Save some money in the long run by using this handy adapter to power any of the AX series of Korg multi-effects pedals.
Korg 4.5VDC Power Supply for PX Series
Save those batteries and the Earth by using a power supply for your PX4, PX4B, PX4A, PX4D, PXR4, PX5D, and Sound on Sound recorder.
Line 6 DC1 9.6VDC Regulated Power Supply for ToneCore
Connect a Line 6 DC-1 power supply and you'll never need a 9 volt battery again! It is also compatible with most popular 9 volt DC stomp boxes.
Line 6 PX2 9VAC Power Supply
Use this power supply to power your Line 6 Stompbox Modeler. This is also the authentic Line 6 power supply originally included with the PODXT and Variax.
Godlyke PA-9 Power-All Digital Universal Pedal Power Supply
The PA-9 Power-All power supply can power up to twenty 9-volt effect pedals or similar devices. It replaces Boss PSA-120, Boss ACA-120, DOD PS-200R, Morley 9V, Dano DA-1, Dunlop ECB-03, Ibanez AC-109, Guyatone AC-2, or any other 9-volt supply with similar tip negative/barrel positive polarity up to 800 mA.
Godlyke Power-All Daisy Chain Cable for 5 Pedals
Add this cable to the Switchmode power supply to power up to 5 more pedals.
Godlyke Power-All Right Angle Daisy Chain Cable for 5 Pedals
Right Angle Daisy Chain connector with standard polarity tip negative/barrel positive jacks connects the PA-9 Power-All to five effect pedals. The CABLE-5 can also be used with Power-All jumper cables to power effects that use different style jacks (reverse polarity, phone plug, battery clip, etc.). Link multiple CABLE-5/R connectors to power over twenty 9-volt effect pedals or similar devices (actual number of units depends on current draw of individual units used).
Morley 9VDC Regulated Power Supply
Morley 9 volt 300mA. Regulated adapter for use with ALL Morley pedals. Center polarity is negative. Equipped with handy LED to show that power is on.
ModTone MT-POWP Power Plant Variable Voltage Energy Station
The ModTone Power Plant is professional quality power supply for the discriminating player. The ModTone Power Plant features a toroidal transformer with eight isolated outputs. Five outputs are switch able from 9vdc to 12vdc, two feature SAG controls to go from 4v-9vdc, and the last is a 9vAC output. The Power Plant is designed to be used in conjunction with almost any pedal you can put on your pedal-board. Each output is isolated and designed to operate without adding any noise to your signal path.
![Power-All GH-1 Ground Hog In-Line Ground Isolator]()
Power-All GH-1 Ground Hog In-Line Ground Isolator
Using proprietary technology, the GH-1 Ground Hound creates an isolated ground connection for any effect unit that is powered off the PA-9 Power-All. Avoid ground loops, reduce line noise, and finally be able to power pedals with opposing ground configurations off the same series power supply!
Power-All IP-1 Iso-Pump Voltage Converter
Not all effect pedals run off 9 volts, and for these oddball units there's the Iso-Pump Voltage Converter. Designed to work specifically with the PA-9 Power-All, the Iso-Pump takes 9 VDC and converts it to 12, 18, or 24 VDC, selectable via an external switch.
Power-All PA9B Basic Kit for 5 Pedals
The PA-9 Power-All is the world's first 2000 mA, single outlet power supply designed specifically for guitar effect users. Don't waste money on batteries or take up valuable space with multiple "wall wart" adaptors or power bricks - the Power-All system can power your entire pedalboard from a single power supply that takes up only one outlet!
Power-All PA9D Deluxe Kit for 11 Pedals
The Power-All Deluxe Kit provides 9 volts DC at 2000 milliamps - more than enough current to power dozens of effect pedals, including up to 4 Line 6 Modelers! The Power-All Deluxe Kit can power eleven pedals out of the box, and comes complete with a variety of jumper cables that allow connection of phone plug, reverse polarity, digital, and battery-only pedal types. New Ten-Foot, 18-gauge output cable allows for longer power runs without the need for an extension cord.
Power-All PA9S Universal Single Power Supply
The PA-9S provides 9 volts DC at 2000 milliamps - use it with the C-11/R daisy chain cable (sold separately) to power dozens of effect pedals, including up to 4 Line 6 Modelers! The PA-9S features a Ten-Foot, 18-gauge cable that allows for longer power runs without the need for an extension cord.
Radial 15VDC Power Supply
15V DC Power supply for Radial and Tonebone pedals.
Rolls PS91ZM 9VDC Power Supply
An affordable 9-volt power supply from Rolls. Handy for powering items such as Zoom products.
Boss PCS-20A - Parallel DC Cords for Effects Pedals
Parallel DC cords for (up to) 8 Boss pedals.
Tascam PSP520 Power Supply for MPGT1
Save money in the long run by not having to buy batteries. The landfill will thank you.
Tech21 9VDC Power Supply
For all Tech 21 floor/pedal models, except for SansAmp Classic.
T-Rex Fuel Tank Universal Power Supply
FuelTank is the power supply for effect users. It gives 1000mA through 10 standard plugs, of which 2 are isolated 12-volt.
T-Rex Fuel Tank Chameleon Universal Power Supply
The Fuel Tank Chameleon is the most versatile power supply T-Rex has ever produced. Built for players with a large number of diverse pedals, the Fuel Tank Chameleon offers all the advantages of the other Fuel Tank power supplies, plus an unprecedented 4 separate voltage options!
T-Rex Fuel Tank Junior Universal Power Supply
The T-Rex Fuel Tank Junior is a lean, mean power supply that will handle virtually any 9-Volt effects pedal - and then some. Just like its big sister Juicy Lucy, Junior features 5 isolated outputs that deliver clean, quiet power to your pedals. Don't let the compact size of this unit fool you - Fuel Tank Junior is a real powerhouse!
T-Rex Juicy Lucy Power Supply
Juicy Lucy is the latest member of T-Rex's family of FuelTank power supplies. It has 5 isolated 12-volt outputs and a full set of standard and customized power cables. FuelTank Juicy Lucy will power every T-Rex pedal you own - and then some. Juicy Lucy has been tested in a lab and has all the approvals you need.
Voodoo Lab Pedal Power 2 Plus Universal Power Supply
Filter, regulate, isolate, and protect! Pedal Power 2 Plus does it, and does it well, because any less will degrade your pedal's performance. Players everywhere upgrade to Pedal Power 2 Plus because it powers what conventional power supplies can't. Pedal Power 2 Plus is hand made in the U.S.A., comes complete with cables, detachable AC power cord, a 5-year warranty, and simply makes you sound better!
Voodoo Lab Pedal Power AC Universal Power Supply
The Voodoo Lab Pedal Power AC is a pedalboard power supply designed to operate high current and AC powered pedal effects. Finally, a professional solution for powering tube overdrives, modeling pedals, or devices including the Whammy, POD, Rotosphere and many others without wall warts.
|